How does a pig feeder mixer work?

1.   How does a pig feeder mixer work?

Pig feed mixer is a kind of mechanical equipment for processing and producing pig feed.   

Inside the cylinder is a blade shaft that can be rotated to stir all kinds of mixed pig feed and then ground into a mixed viscous feed.   The principle of pig feed mixer is:

When the material is inhaled or fed into the pig feed mixer, the speed difference between pig feeds is used to make the pig feed collide, rub and mix with each other in the mixing tank.   

Stirred into powder or particles, by centrifugal force or air flow through the sieve discharged.

Two, how to use the pig feeder mixer?

Pig feed mixer can be used to make pig feed mix, and its use method is very simple:

1.   Install and fix the pig feed mixer in a horizontal position.   If it is not uniform, you can smooth it with a wooden board, check whether the connecting parts are normal, whether the power supply, switches and other electrical parts are normal, and whether there is debris in the machine.

2, Begin to prepare pig feed, a warehouse is a batch of materials required for the mixed feed, start the mixing motor, and then start the crushing motor, feed the non-crushing material from the auxiliary hopper, join the crushing material from the crusher, on both sides at the same time, until the main and auxiliary materials are all processed, and then continue to stir for 5-10 minutes to complete the cycle.

3.   After the finished products are bagged, remove the sundries in the materials in time, and then carry out the next batch of production.

Iii.   Precautions for using pig feeder mixer

1.   When in use, the pig feed mixer must be placed in a relatively flat place to avoid the mixer walking while in use.

2.   Before use, check whether all parts of the mixer operate normally.   If any exception is found, stop using the device and check the fault before using it.

3.   Do not use the pig feed mixer directly once it is turned on.   Idling for 3 minutes is necessary to ensure that there is no abnormal phenomenon before operation.

4.   After using the pig feed mixer, the power supply should be cut off, and the pig feed mixer should be properly cleaned.

5, the feed should be uniform, pay attention to the degree of power load, available pumping plate regulator section feeding amount.

6.   The machine personnel operating the pig feed mixer must undergo strict professional training and be familiar with the various functions and precautions of the machine.