How to choose a pig feeder？

The choice of feeding machinery for pig farms depends on production capacity. Damage to the rated production capacity of the machinery (kg/ h) is included in the manual and nameplate of the damaged machinery. However, it should be noted that the rated production capacity refers to the output value under certain circumstances.

For example, a grain feed damage machine is a damaged material with a water content (about 13%) and a sieve diameter of 1. .2mm. Corn is a common grain feed with diameter 1. 2mm sieve is a commonly used small sieve, the current production capacity is small, considering the wide range of production, difficult. (2) The production capacity of mechanical damage should be slightly greater than the actual production capacity, otherwise it will increase hammer wear and air duct leakage, resulting in reduced production capacity, affecting the continuous production and supply of feed.

Feed machinery manufacturers select based on damaged materials. If the grain feed is mainly damaged, the top feed hammer can be selected to damage the machinery; If the grain feed is mainly damaged, you can choose claw damage machinery; If you need good versatility, the main damage grain, grain and straw coordination, you can choose to cut the hammer damage machinery; If the shell and other mineral feed are damaged, the shell can be selected without screening damage machinery; If the pre-mixed feed is pre-treated, the product damage particle size is very fine, can be scheduled according to the need, should choose no screening damage machinery.